Henan LED street lights, Zhengzhou sign poles, Zhengzhou solar street lights, octagonal poles
Introduction to the installation steps of solar street lights by a manufacturer in Henan, including important considerations.
Category: Industry News
Oct 21,2022
Things to pay attention to in the installation steps of solar street lamps by Henan street lamp manufacturer
1. Fully understand the characteristics of solar street lamp lighting fixtures, light sources, and street lamps, integrate specific lighting standards for the road surface and reference standards, combine investment budget, and scientifically adopt solar lighting fixtures, light sources, and street lamps to fully utilize the energy-saving features of light sources, the light transmission of solar lighting fixtures, and the advantages of component combinations.
2. Under the condition of ensuring sunlight exposure characteristics, moderately increase the spacing between solar street lamp lighting fixtures to reduce the total number of lighting fixtures; moderately increase the relative height of solar street lamps to improve lighting effects; try to place poles in the middle of the road separation zone to save project costs.
3. In conjunction with municipal road engineering, moderately intervene in pole position selection, foundation construction, and embedded parts in advance to facilitate early problem detection, effective adjustments, ensure quality and quantity, and save project investment.
4. Based on the specific conditions and geological situation at the solar street lamp project site, create a solid foundation for solar street lamps and lamp poles to ensure they are sturdy and reliable. Pay special attention to the compatibility of anchor bolts with reserved holes in the pole base, clear targets, effective lengths of embedded parts, and proper protection of threaded sections for accurate lifting positioning.
5. In rocky layers or weathered stone areas where dispersed grounding devices and segmented grounding devices are difficult to meet requirements, consider using galvanized flat iron or other conductive materials for long connections as per design points. Ensure reliable connections while implementing appropriate safety protection solutions and ensuring reliable connections with embedded parts to guarantee that each street lamp is reliably connected to the ground. The poles of solar street lamps are relatively dispersed and rely on basic grounding; if necessary, use resistance-reducing agents to lower grounding line resistance.
6. Lifting operations must strictly follow safety operating procedures. Pay special attention to power grid lines and other routes around lifting equipment as well as nearby buildings; ensure that lifting points are scientifically determined and promptly corrected after positioning.
7. Pay attention to the aesthetics of solar street lamp installation. Starting from foundation construction, maintain parallel alignment based on main line tasks while scientifically adjusting according to highway design line changes; ensure that street lamps are vertical, avoid main traffic directions when processing welding and maintenance holes, and maintain consistency throughout. The tilt angle of the street lamp's cantilever should always align with targets and angles harmoniously.
8. Internal components of solar street lamp lighting fixtures must be securely inserted to prevent loosening due to wind sway or poor contact leading to common faults. Solar street lamp lighting fixtures must be reliably fixed with street lamps, and street lamps must be securely fixed with cantilevers. Each section of the pole in solar street lamps should fit properly; lifting frames must be reliably fixed with lighting fixtures, and lifting mechanisms should be trustworthy with complete services for adjustment, positioning, etc.
Henan street lamp manufacturer: Thank you all for watching. Our company has various types of street lamps. If you need any, remember to call for consultation. Alright, Henan street lamp manufacturer wishes everyone a happy life. See you next time.
Related News
Jul 22,2024
Jul 02,2024
Jun 22,2024
Jun 12,2024
Jun 02,2024
Contact Information
Tel:+86-371-62650998
Mobile Phone:+86-13623854456 / +86-18637168316
WeChat: ar13623854456
Address: 300 m west of intersection of Beijing-Hong Kong line and G107 in Lihe Town, Xinzheng City, Henan Province
Scan the code
