Henan LED street lights, Zhengzhou sign poles, Zhengzhou solar street lights, octagonal poles
Introduction to the performance and components of high pole lights
Category: Industry News
May 21,2022
Working principle and performance of high pole light
High pole lightThe working principle and performance generally consist of the following parts: solar panel, battery, solar street light dedicated controller, light source, and lamp pole. During the day, the solar panel receives sunlight to generate electricity, the charging controller charges the battery, and the electrical energy is stored in the battery. At night, solar charging stops, and the charging controller turns on the light source, which will turn off after a delay of 6-10 hours. The electrical energy in the battery can support the light source to work continuously for 50 hours. Based on a daily operation of 10 hours, it can work continuously for 5 days.
I. Performance
1. Lamp pole
The lamp is made of low-carbon steel plate through cutting, bending, and automatic welding. All structural components of the lamp are treated with hot-dip galvanizing and surface anti-corrosion treatment, ensuring that all inner and outer surfaces are properly protected, extending service life and saving maintenance costs.
2. Explosion-proof electrical control system
The explosion-proof electrical control and protection devices are installed in a control box fixed at the bottom of the lamp, equipped with a lighting controller and motor controller. The dual-circuit power cable supply can achieve full-load lighting and partial lighting, with manual control, light control, and computer time control to meet different user needs.
Power supply through traction cable; the explosion-proof electric control box and lighting cable are connected via a dedicated plug with a locking device. High pole light
3. Explosion-proof automatic lifting system
This system consists of an explosion-proof motor, worm gear, drum, etc. The self-locking worm drive mechanism can stop the lamp board at any position, providing overload protection and having both automatic and manual operation functions.
4. Steel cable guiding pulley system
This component consists of three sets of pulley arms arranged at a 120° angle and fixed on a supporting structure at the top of the lamp pole. Each set of pulley arms is equipped with:
A. Special bearings that are lifetime lubricated and sealed.
B. A unloading device specifically designed for automatically locking and releasing the lamp board. High pole light
C. Pulleys made from polymer non-metallic insulating materials that will not damage cable instruments.
D. A stop device to prevent the steel wire rope from slipping out of the guiding wheel.
5. Hook system
Through computer-aided design, a special geometric switch for the hook system has been designed. After precise calculations and practical verification, it can ensure that when the lamp board rises to a predetermined position, the hook will move relative to the unloading device under the traction of the steel wire rope, achieving locking and unloading purposes. During normal use, the steel cable is in an unloaded state, extending its service life and ensuring that the lamp board remains stable in harsh weather conditions.
This concludes our introduction to high pole lights. Thank you all for watching. If you need to purchase high pole lights, please contact our company.
Related News
Jul 22,2024
Jul 02,2024
Jun 22,2024
Jun 12,2024
Jun 02,2024
Contact Information
Tel:+86-371-62650998
Mobile Phone:+86-13623854456 / +86-18637168316
WeChat: ar13623854456
Address: 300 m west of intersection of Beijing-Hong Kong line and G107 in Lihe Town, Xinzheng City, Henan Province
Scan the code
