Henan LED street lights, Zhengzhou sign poles, Zhengzhou solar street lights, octagonal poles
The solar street light manufacturer in Zhengzhou will explain the installation instructions for solar street lights.
Category: Industry News
Apr 27,2022
Zhengzhou solar street light manufacturer will explain the installation instructions for solar street lights.
Zhengzhou Solar Street LightManufacturer: The working principle of solar street lights.
During the day, the solar photovoltaic panels absorb sunlight and convert it into electrical energy. The electrical energy generated by the solar photovoltaic panels is controlled by a controller and stored in a battery. At night, the controller intelligently outputs the electrical energy from the battery to drive the LED light source to emit light, producing illumination.
Zhengzhou solar street light manufacturer: Detailed instructions for installing solar street lights.
1. Fix the foundation's ground cage, ensuring that the ground cage foundation is level with the base of the new solar street light, meaning it should be level in two directions: one horizontal and one vertical to the measured top. The concrete for the buried foundation must be dense to prevent air bubbles in the concrete.
2. The embedded pipe openings should use plastic pipe paper or sealing to prevent concrete from pouring into other materials. After pouring the foundation, it must be raised 5 to 10mm above the ground during the concrete curing period to ensure that the concrete reaches a certain strength.
3. The lamp pole must be grounded, with a grounding resistance of less than 5 ohms; each pole should be determined based on specific site data and construction needs.
4. Installation requirements: 1. Firm installation; 2. Vertical to the centerline of the image; The center of the lamp pole image should be parallel to the road with a 180-degree connection between two grooves; Technical data should be measured on-site to estimate quantity, first lay C20 concrete pads for ground cages, backfill fine sand and compact it, then restore the road according to actual conditions. The lamp pole should be made of galvanized steel; exposed cables (excluding overhead cables) should be protected by galvanized steel.
Zhengzhou Solar Street LightManufacturer: Why do solar lamp poles need painting?
The application of solar street lights is not conducive to the development trend of traditional street lights. From a distance, all traditional street lights are under siege. With the emergence of solar street lights, more and more customers are easily accepting the practical effects of environmental protection.
Without solar street lights, the lighting field would be much quieter; all communication companies could sit on their matching thrones. The rise of solar street lights will undoubtedly break away from this traditional industry's layout, and perhaps the landscape of traditional street lights will be refreshed. This is very good plastic powder; the quality of plastic powder may change completely in about a year, and wild plant plastic powder has poor aging resistance.
Why do solar lamp poles need spray paint: After spraying paint on solar lamp poles (welding sand holes), there is almost no rust prevention solution for cold/hot galvanizing. Therefore, paint is a factor that damages the aesthetics of street lights. After using hot-dip galvanized anti-corrosion coating technology, building coatings, and plastic coatings, Z will choose plastic powder as powder. Wild plant plastic powder has high toughness and strong adhesion characteristics.
The introduction to solar street lights ends here. Thank you for watching, and see you next time.
Related News
Jul 22,2024
Jul 02,2024
Jun 22,2024
Jun 12,2024
Jun 02,2024
Contact Information
Tel:+86-371-62650998
Mobile Phone:+86-13623854456 / +86-18637168316
WeChat: ar13623854456
Address: 300 m west of intersection of Beijing-Hong Kong line and G107 in Lihe Town, Xinzheng City, Henan Province
Scan the code
