Key points of design and maintenance tips for sign poles in Zhengzhou.

Zhengzhou sign poles and traffic sign poles can effectively control traffic and reduce the number of faulty drivers. Now, after a period of adjustment, the red light has been set to 12 seconds and the green light to 8 seconds. Therefore, when drivers see the signals indicating 'stop' or 'go', please do not doubt the light issue; follow the instructions displayed by the lights to start or stop.

Zhengzhou sign pole, traffic sign poles can effectively control traffic and reduce the number of faulty drivers. Now, after a period of adjustment, the red light is set to 12 seconds and the green light to 8 seconds. Therefore, when drivers see the signal indicating 'stop' or 'go', please do not doubt the light issue; start or stop according to the light display. Let's learn more about it.Zhengzhou sign poleDesign key points and maintenance tips.

　　

The circular yellow light continuously illuminates at the intersection angle, creating a warning effect. Generally, when the yellow light is on, there will be a pedestrian crossing ahead. The significance of this light is to alert right-turning drivers to slow down and watch for pedestrians crossing the sidewalk; this light serves only as an early warning.

DesignZhengzhou sign poleDetails must be handled well

1. Aluminum plate splicing

The main problem with aluminum plate splicing is that the rivet marks are obvious after splicing, and the reflective film at the joint is prone to jagged cracks. The solution is to first create a depression at the rivet location according to the size of the rivet, then after inserting the rivet, use a grinding wheel to smooth the rivet head, which basically solves the issue of obvious rivet marks. To prevent irregular cracks, the reflective film should be cut straight at the joint of the aluminum plates before applying it, rather than cracking on its own after being applied.

2. Engraving assembly

High-strength reflective film has poor toughness and is hard, so we need a sharp engraving tool during the engraving process. Currently, there are many manufacturers producing engraving machines and lettering machines in China, but for engraving materials—high-strength reflective film—most ordinary lettering machines cannot handle it well. Although there has been significant progress in domestic engraving knife head manufacturing technology and quality issues, there is still a considerable gap compared to knife heads. The hardness of high-strength reflective film requires specialized engraving equipment to ensure that the engraved patterns and text are clearer and smoother. For adhesive quality, try to apply the engraved patterns and text immediately; do not leave them for long periods. The temperature should be above 18 degrees Celsius to avoid affecting adhesive strength and shortening product lifespan. Additionally, pressure management for engraving machines should be adjusted continuously to avoid shortening the lifespan of engraving equipment.

3. Pattern and text design

Before designing, try to fill as much space as possible with fonts. In the early stages of design, to verify the rationality of traffic sign pole design standards, large samples of traffic sign pole layouts can be created on a computer. For temporary traffic sign pole face designs, conducting preliminary experimental design verification is a good design method that not only adheres to traffic sign pole design standards and rationality but also saves manpower and material resources from unnecessary modifications due to unreasonable designs.

4. Detail handling during film application

Due to the large size of traffic sign pole faces, high-strength reflective films are more brittle than engineering reflective films and are difficult to apply without creating bubbles. To address these issues, measures should be taken: strictly control workshop hygiene to avoid excessive humidity; ensure that aluminum plate humidity is not too low before applying film; good humidity control is an important prerequisite for road traffic poles. For any bubbles formed, measures such as suction, blowing, ironing, or patching should be taken for ideal results.

　　Zhengzhou sign poleFunctionality

On one hand, Zhengzhou sign poles have a long service life; on the other hand, they perform well in terms of effectiveness. Generally, practices may include:

1. The installation of road traffic signs should be prioritized in road restoration projects, whether for new roads or for modifications or expansions of existing roads. After completing pole traffic sign symbols, all other traffic signs in the network should also be promptly adjusted with new or corrected information.

2. Information management on symbolic poles should be expressed in a concise manner that reflects our country's traffic system information so that passing individuals can easily understand their location and other relevant traffic information.

3. Relevant sections should regularly clean and protect symbolic poles to enhance visual recognition of new traffic information so that visitors can easily see traffic information on symbolic poles.

4. The appearance and shape of symbolic poles should be selected based on target needs.

Maintenance tips for Zhengzhou sign poles

1. The shape and color of Zhengzhou sign poles during use should comply with relevant regulations;

2. Traffic safety sign poles should be regularly cleaned and maintained to ensure sufficient reflective system performance and visibility. During use, care should also be taken to avoid obstruction by other objects or interference from street lighting environments;

3. When road traffic conditions change, relevant signs should be adjusted promptly. Road signs and city road name signs should be used as much as possible so that road users understand their routes and locations;

4. The installation (adjustment) of road traffic signs should be completed before new (modified or expanded) roads are opened for traffic while also adjusting related signs within the road network accordingly.

The above introduces key points in Zhengzhou sign pole design and maintenance tips. For more information, feel free to contact us! Our company has many years of experience and we look forward to your joining.