What are the installation precautions for solar street lights in Zhengzhou?
Category: Industry News
Feb 28,2023
With the increasing scarcity of traditional energy, the application of solar energy is becoming more widespread, especially in the field of solar power generation, which has developed into a mature sunrise industry in just a few years. Now many street lights have been converted toZhengzhou Solar Street Light. When many roads are upgraded to solar street lights, many people do not know how to install solar energy. Below, the editor will introduce some precautions and how to install solar street lights.
1. Installation location of Zhengzhou solar street light:
1. Solar street lights should be installed on the surface of the solar panels, with all-day lighting, sufficient light, and no shading.
2. Determine the roadside light source based on the road direction and light source position, moving the solar panels southward.
3. The solar panels above should not become direct light sources to avoid malfunctions in the lighting control system due to misidentification.
4. On-site installation of solar street lights cannot use other facilities (such as cables, pipes, etc.).
5. Changzhou solar street lights should be kept as far away from heat sources as possible to avoid affecting the lifespan of the lamps.
6. Environmental working temperature: -20℃~60℃. In cold environments, the capacity of the battery should be appropriately increased.
2.Zhengzhou Solar Street LightInstallation precautions:
1. First fix the lamp base arm, then lift the bracket arm and fixed main pole, inserting the cable into the control box and battery box.
2. Before hoisting the well frame, check whether the fasteners are securely tightened and whether the lamp installation is correct. The lamp cable is connected to the control box. Pay attention to the positive and negative connections, then observe changes in the indicator light on the controller.
3. Pay attention to safety measures when lifting the pole. The screws should be tightened well. Check whether components are installed correctly. For example, the angle facing the sun needs to be adjusted southward.
4. Place the battery in the battery box and connect it to the controller according to the connection wires. The technical requirement is that the battery can withstand load before using solar panels. When observing controller connections, there should be no errors on each terminal. If there is a collision between positive and negative poles, they should not be incorrectly connected; otherwise, it will damage the controller.
5. Adjust the system normally, loosen the control cable, connect it to the solar panel, and carefully observe changes in indicators. Test before closing the control box to avoid other faults.
3. In daily use, attention should be paid to the following matters regarding solar panels:
1. Do not let hard or sharp objects hit the surface of solar street lights; otherwise, it will damage the solar panel.
2. During use, solar panels need regular cleaning (every six months is recommended). Keep the surface clean; otherwise, it will affect conversion efficiency.
3. Do not let objects (such as branches, billboards, etc.) block the surface during use; otherwise, it will affect conversion efficiency.
4. When installing solar panels, they need to be tilted southward at an angle of 30 degrees.
4. Daily usage precautions for Zhengzhou solar street light batteries:
1. The buried box must be sealed and waterproof; if damaged or broken, it should be replaced promptly.
2. Do not short-circuit the positive and negative terminals of the battery; otherwise, it will damage the battery.
3. The general lifespan of a battery is 2 to 3 years; after this period, timely replacement of batteries is required.
Related News
Jul 22,2024
Jul 02,2024
Jun 22,2024
Jun 12,2024
Jun 02,2024